Difference between revisions of "2012 DOCK tutorial with Streptavidin"

Revision as of 09:58, 27 February 2012

For additional Rizzo Lab tutorials see DOCK Tutorials.

Use this link Wiki Markup as a reference for editing the wiki.

I. Introduction

DOCK

DOCK is a molecular docking program used in drug discovery. It was developed by Irwin D. Kuntz, Jr. and colleagues at UCSF (see UCSF DOCK). This program, given a protein binding site and a small molecule, tries to predict the correct binding mode of the small molecule in the binding site, and the associated binding energy. Small molecules with highly favorable binding energies could be new drug leads. This makes DOCK a valuable drug discovery tool. DOCK is typically used to screen massive libraries of millions of compounds against a protein to isolate potential drug leads. These leads are then further studied, and could eventually result in a new, marketable drug. DOCK works well as a screening procedure for generating leads, but is not currently as useful for optimization of those leads.

DOCK 6 uses an incremental construction algorithm called anchor and grow. It is described by a three-step process:

1. Rigid portion of ligand (anchor) is docked by geometric methods.
2. Non-rigid segments added in layers; energy minimized.
3. The resulting configurations are 'pruned' and energy re-minimized, yielding the docked configurations.

Streptavidin & Biotin

Streptavidin is a tetrameric prokaryote protein that binds the co-enzyme biotin with an extremely high affinity. The streptavidin monomer is composed of eight antiparallel beta-strands which folds to give a beta barrel tertiary structure. A biotin binding-site is located at one end of each β-barrel, which has a high affinity as well as a high avidity for biotin. Four identical streptavidin monomers associate to give streptavidin’s tetrameric quaternary structure. The biotin binding-site in each barrel consists of residues from the interior of the barrel, together with a conserved Trp120 from neighbouring subunit. In this way, each subunit contributes to the binding site on the neighboring subunit, and so the tetramer can also be considered a dimer of functional dimers.

Biotin is a water soluble B-vitamin complex which is composed of an ureido (tetrahydroimidizalone) ring fused with a tetrahydrothiophene ring. It is a co-enzyme that is required in the metabolism of fatty acids and leucine. It is also involved in gluconeogenisis.

Organizing Directories

While performing docking, it is convenient to adopt a standard directory structure / naming scheme, so that files are easy to find / identify. For this tutorial, we will use something similar to the following:

~username/AMS536/DOCK-Tutorial/00-original-files/
                              /01-dockprep/
                              /02-surface-spheres/
                              /03-box-grid/
                              /04-dock/
                              /05-virtual-screen/

The following sections in this tutorial will refer back to files within these directories.

II. Preparing the Receptor and Ligand

Downloading the PDB Structure (1DF8)

The Protein Data Bank contains atomic coordinates for more than 79,000 molecules and is accessible via the internet from PDB. The target (protein or nucleic acid) is accessible by PDB ID, molecular name, or author. After entering the PDB ID, molecule name, or author, click Download Files, then select PDB File (text). A window will open; click on Save File → Downloads.

Preparing the Ligand and Enzyme in Chimera

III. Generating Receptor Surface and Spheres

Receptor Surface

To generate an enzyme surface, first open the receptor pdb file with the hydrogen atoms removed (1DF8.receptor.noH.pdb). Next, go to Actions -> Surface -> Show. Note that for DOCK calculation hydrogen atoms are considered, but for generating enzyme surface and spheres, it is necessary to use the protein without hydrogens.

2012_DOCK_Tutorial_1DF8_surface

Recent versions of Chimera include a Write DMS tool that facilitates calculation of the molecular surface. Go to Tools -> Structure Editing -> Write DMS. Save the surface as 1DF8.receptor.dms.

Spheres

To generate docking spheres, we need to use a command line program called sphgen. To run the sphgen, we need a input file named INSPH.

$1DF8.receptor.dms #molecular surface file that we got from previous step $R #sphere outside of surface (R) or inside surface (L) $X #specifies subset of surface points to be used (X=all points) $0.0 #prevents generation of large spheres with close surface contacts(defalut=0.0) $4.0 #maximum sphere radius in angstroms (default=4.0) $1.4 #minimum sphere radius in angstroms (default=radius of probe) $1DF8.receptor.sph #clustered spheres file that we want to generate

IV. Generating Box and Grid

Box

In order to speed up docking calculations, DOCK generates a fine grid, and at each point in the grid electrostatic and a VDW probes' energies are precomputed. The energies are computed using a molecular force field. To determine the dimensions of the grid, however, we first generate a box that contains the outer boundaries for grid calculation. The dimensions and location of the box can be determined using a program called showbox.

First create a directory where you will place the grid files.

$mkdir 03-box-grid
$cd 03-box-grid

showbox can be used interactively or a file with predetermined answers can be fed into the program.

The program asks the questions depicted in the diagram the right:

To run the program in the interactive mode, run

$showbox

To feed the answers to the questions, run

$showbox < showbox.in

For example, showbox.in can contain:

Y
5
../02-surface-spheres/selected_spheres.sph
1
1DF8.box.pdb

Y means we use automatic box construction, 5 is the extra margin to be enclosed around our ligand (in Angstroms), selected_spheres.sph is the sphere file we generated, 1 corresponds to the cluster number in the selected_spheres.sph file, and 1DF8.box.pdb is the output file. We can open the output box file in chimera to make sure the box is in the right place.

1DF8 receptor along with our ligand and the box we generated using showbox

Grid

Now let's generate a grid within our box. We will use the energy scoring method to generate a grid, resulting in three additional files with extensions *.nrg, *.bmp, and *.out. The *.nrg file contains the energy scoring, *.bmp contains the size, position and grid spacing and determines whether there are any overlap with receptor atoms.

To generate the grid we will use the grid program. This program can either be used interactively, or an input file can be fed in, just like the showbox program.

Usage: grid [-i [input_file]] [-o [output_file]] ...
 [-standard_i/o] [-terse] [-verbose]
 
 -i: read from grid.in or input_file, standard_in otherwise
 -o: write to grid.out or output_file (-i required), 
     standard_out otherwise
 -s: read from and write to standard streams (-i and/or -o illegal)
 -t: terse program output
 -v: verbose program output

For our grid.in file, we will use the following answers:

compute_grids                  yes
grid_spacing                   0.3
output_molecule                no
contact_score                  no
energy_score                   yes
energy_cutoff_distance         9999
atom_model                     a
attractive_exponent            6
repulsive_exponent             9
distance_dielectric            yes
dielectric_factor              4
bump_filter                    yes
bump_overlap                   0.75
receptor_file                  ../01-dockprep/1DF8.receptor.mol2
box_file                       1DF8.box.pdb
vdw_definition_file            /opt/software/AMS536software/dock6/parameters/vdw_AMBER_parm99.defn
score_grid_prefix              grid

Line by line:

1. compute scoring grids (yes)
2. what is the distance between grid points along each axis (in Angstroms).
3. write up coordinates of the receptor into a new file
4. compute contact grid? default is no
5. compute energy score? yes - we are using this method to compute force fields on probes
6. the max distance between atoms for the energy contribution to be computed
7. atom_model u means united atom model where atoms are attached to hydrogens, and a stands for all-atom model, where hydrogens on carbons are treated separately
8. attractive component stands for exponent of the attractive LJ term in VDW potential
9. repulsive component stands for exponent in the repulsive LJ term in VDW potential
10. distance dielectric stands for the dielectric constant to be linearly dependent on distance
11. distance dielectric factor is the coefficient of the dielectric
12. bump filter flag determines if we want to screen orientation for clashes before scoring and minimization
13. bump_overlap stands for the fraction of allowed overlap where 1 corresponds to no allowed overlap and 0 corresponds to full overlap being permitted.
14. our receptor file
15. the box file we generated in the Box section
16. VDW parameters file
17. Prefix for the grid file name. All the extensions will be generated automatically.

V. Docking a Single Molecule for Pose Reproduction

Docking and Results

Change directory into “04-dock” and create an empty input file called dock.in

$touch dock.in     #create a file called “dock.in”

Run dock6.4

$dock6 -i dock.in

Alternatively:

$dock6 -i dock -v # “-v” option allows you to print out the information regarding each growth step on terminal

Or:

$dock6 -i dock -o dock.bf.out -v # “-o” allows you to write the aforementioned information into an output file named “dock.bf.out”

1st run:

Notice that running dock6 with an empty input file will require you to answer a series of questions. For the first run we will deactivate most of the features by selecting “no”. Parameters requiring specification are listed below:

ligand_atom_file [database.mol2] ():   	../01-dockprep/1DF8.ligand.mol2
ligand_outfile_prefix [output] ():   		1DF8.output

What the program is doing in the 1st run is to take the ligand.mol2 file and directly generate an output file without any additional manipulations. You would expect it to be exactly the same as the original pose. You can open it in Chimera by using the “ViewDock” function under “Tools->Surface/Binding Analysis”. We will not show the result here.

2nd run:

The real experiment begins here. Notice that we selected “no” for most of the functions. This time we will try change some parameters in the dock.in file.

$vim dock.in

Parameters being changed are listed below:

orient_ligand                                               yes
calculate_rmsd                                              no

Note that because of these parameters, additional questions are asked by the program. For simplicity we keep most of the answers as default. File paths requiring specifying are listed below:

receptor_site_file                          [receptor.sph] ():../02-surface-spheres/selected_spheres_06A.sph
vdw_defn_file                               [vdw.defn] ():../03-grid/vdw_AMBER_parm99.defn 
flex_defn_file                              [flex.defn] ():../03-grid/flex.defn 
flex_drive_file                             [flex_drive.tbl] ():../03-grid/flex_drive.tbl

The result is shown below. As you may notice the result doesn't look very good. File:Unilangwikilogosmall.jpg

3rd Run:

Here we will further specify parameters to improve the result.

calculate_rmsd                                               yes
score_molecules                                              yes
num_scored_conformers                                        10

Again, further questions will be asked when you run the program. Keep most answers as default. Paths requiring specification are listed below:

grid_score_grid_prefix                                        [grid] ():../03-grid/1DF8.grid

Note that the above specification will tell the program to load the 1DF8.grid.nrg file you generated in the previous step (grid) for scoring.

simplex_max_iterations                                        [1000] ():20
write_conformations                                           [yes] (yes no):no
cluster_rmsd_threshold                                        [2.0] ():0.2

Note the program will cluster poses that are very close together (rmsd smaller than the threshold specified) into a cluster.

This time the program returned the best 10 poses. The one with the best grid score (-52.8, shown blue) superimposed quite well with the original pose in the crystal structure (RMSD = 0.71). You can view the grid scores in ViewDock by selecting “Column->Show->Grid Score”

4th Run:

This time we will set the ligand as flexible:

flexible_ligand                                              yes

Further questions will be asked during the run. Keep most of the answers as default except for:

simplex_grow_max_iterations                                   [20] ():500

Notice that the run is significantly slower this time. Again the best pose generated (-64.8) is shown in blue. The grid score improved significantly but the RMSD did not change much (0.79)

5th Run:

This time we will turn the bump filter on:

bump_filter                                                  yes

Further questions will be asked during the run. Keeps answers as default. Specify the following path:

bump_grid_prefix                                              [grid] ():../03-grid/1DF8.grid

Note that the path tells the program to access the .bmp file generated in the previous grid step.

The best pose (grid score -65.3) is again shown in blue. Notice that turning on the bump filter does not alter either the grid score or the RMSD (0.78).

Remember you can tweak any parameter in the dock.in file instead of keeping them as default.

Now we will write up a script for submitting your dock job to Seawulf. Create a script called “sub.dock.csh”

$vim sub.dock.csh

wherein you write:

#! /bin/tcsh 
#PBS -l nodes=1:ppn=1 
#PBS -l walltime=01:00:00 
#PBS -o zzz.qsub.out 
#PBS -j oe 
#PBS -V 
set nprocs = `wc -l $PBS_NODEFILE | awk '{print $1}'` 

echo "Running on ${nprocs} processors" 

cd ~/AMS536/DOCK_tutorial/05-dock_qsub 

dock6 -i dock.in -o dock.out 

This will request 1 processor from the cluster for your job. When you are submitting the job:

$qsub sub.dock.csh

Note that you might have to make the script executable before running it:

$chmod +x sub.dock.csh

Results

VI. Virtual Screening

Virtual Screening Preparation

Virtual Screening Protocol

Virtual Screening Results

VII. Running DOCK in Serial and in Parallel on Seawulf

Use PBS Queue as a reference.

Serial Calculation for Pose Reproduction

Parallel Virtual Screen

VIII. Frequently Encountered Problems